Perlite

Slab

Published: Wednesday, 04 October 2017 12:08 Category: Carbon steel

slab

Physical Specifications

Typical	Physical Analysis
200-250 mm	Thickness
900-2000 mm	Width
6000-12000 mm	Strength

Steel Channel

Published: Wednesday, 04 October 2017 12:07 Category: Carbon steel

steel channel

Chemical analysis

Angle

Published: Wednesday, 04 October 2017 12:01 Category: Carbon steel

Angle

Chemical analysis
Order Product

Chemical analysis

Sheet

Published: Wednesday, 04 October 2017 12:06 Category: Carbon steel

sheet

Galvanizing Sheet

Continuos Hot Dip Galvanizing	Production Method
CRC (Full Hard)	Entry Coil
0.25-2 mm	Thickness
750-1510 mm	Width
508 or 610 mm	Inner Diameter of Coil
900-2000 mm	Outer Diameter of Coil
3-23.8 MT	Exit Coil Weight
100-350 g/m2	Zn Coating Mass(both Sides)
0.5-2 g/m2	Max Oil Film

Color Coating Sheet

Galvanizing Coils,Skin passed cold-rolled coil	Entry Steel Strip
0.25-1.5 mm	Thickness
750-1500 mm	Width
508 or 610 mm	Inner Diameter of Coil
915-1900 mm	Outer Diameter of Coil
3-12 MT	Exit Coil Weight
A- Prepainted Coil
5 microns	Primer Soat Thinckness
20 microns	Top Coat Thickness
Polyester	Primer Material
Polyester (normal, VHP), polyvinylidene fluoride,epoxy,polyvinyl chloride,polyurethane	Top Coat Material
B- Embossed Sheets
100-200 microns	Top Coat Thickness
Plastisol (PVC)	Top Coat Material
C- Laminated Sheets
PET,PVC	Film Material
30 microns	Pet Film Thickness

Tin-Plating Sheet

0.18-0.4 mm	Thickness
600-1050 mm	Width (Coil)
600-1000 mm	Width (Sheet)
420 mm	Inner Diameter of Coil
Max 2000 mm	Outer Diameter of Coil
2-8 MT proportional with coil width	Weigh (Coil)
1-2 MT	Weigh (Sheet)
2.8-15.2 g/m2	Tin Coat Weigh (One Side)
4-8 mg/m2	Oil Layer
2.5-8 mg/m2	Neutral Layer

EN 10203/91	JiS G 3303 / 87	ASTM A 623 M/92
T 52	SPTE (T 2)	T 2
T52	SPTE (T 3)	T 3
T61	SPTE (T 4)	T 4

Billet

Published: Wednesday, 04 October 2017 11:59 Category: Carbon steel

billet

Dimension & Tolerances

Dimension & Tolerances
130x130 (+/_4mm)	Cross Section
150x150 (+/_5mm)
8000-12000 (+/_100mm)	Length

More Articles ...

Beam
Rebar

About us

Founded in 2014 and headquartered in Muscat, Apex Perfect L.L.C. is a global supplier of steel products, Petroleum and raw material which is essential in the manufacturing of iron and steel industries.

P.O. BOX : 207 Muscat

P.C. : 138, Sultanate of Oman

This email address is being protected from spambots. You need JavaScript enabled to view it.

Tell: +96824987487